CLLYR - HIGH SOLIDS EPOXY PRIMER
- MSDS: CLLYR
- Manufacturer: THE DEXTER CORP
- Product Name: HIGH SOLIDS EPOXY PRIMER
- National Stock Number: 8010-01-387-1069
Product Identification
Product ID:HIGH SOLIDS EPOXY PRIMER
MSDS Date:09/18/1998
FSC:8010
NIIN:01-387-1069
Status Code:A
MSDS Number: CLLYR
Responsible Party
WAUKEGAN, IL 60085
US
Emergency Phone: (800)424-9300
Info Phone: 847-623-4200
Preparer: HENRY SIMMONS
Cage: 91342
Contractor
Telephone: 847-623-4200
Cage: 91342
Ingredients
PROPRIETARY EPOXY RESIN
STRONTIUM CHROMATE
CAS: 7789-06-2
RTECS: GB3240000
OSHA PEL SEE TABLE Z-2
ACGIH TLV: 0.0005 MG/M3
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
METHYL AMYL KETONE
CAS: 110-43-0
RTECS: MJ5075000
OSHA PEL 465 MG/M3;100 PPM
ACGIH TLV: 233 MG/M3;50 PPM
XYLENE
CAS: 1330-20-7
RTECS: ZE2100000
ACGIH TLV: 434 MG/M3;100 PPM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
METHYL ISOBUTYL KETONE
CAS: 108-10-1
RTECS: SA9275000
OSHA PEL 410 MG/M3;100 PPM
ACGIH TLV: 205 MG/M3;50 PPM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
CRYSTALLINE SILICA
CAS: 14808-60-7
RTECS: VV7330000
OSHA PEL see Table Z-3
ACGIH TLV: 0.1 MG/M3
CHROMIUM VI IN NON VOLATILES
CAS: 7440-47-3
RTECS: GB4200000
OSHA PEL 1 MG/M3
ACGIH TLV: 0.5 MG/M3
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:ACUTE: OVER EXPOSURE BY INHALATION MAY
CAUSE IRRITATION OF THE RESPIRATORY TRACT, HEADACHE, DIZZINESS, OR
DROWSINESS. CHRONIC: THOSE HAZARDOUS MATERIALS LISTED IN SECTION II
MAY AFFECT THE FOLLOWING O RGANS: RESPIRATORY TRACT -CENTRAL
NERVOUS SYSTEM-KIDNEYS-LIVER REPRODUCTIVE SYSTEM.
Effects of Overexposure:SKIN OR EYE CONTACT: IRRITANT TO THE EYES AND
SKIN.
First Aid
First Aid:INHALATION: REMOVE FROM EXPOSURE. EYE CONTACT: FLUSH
IMMEDIATELY WITH LARGE AMOUNTS OF RUNNING WATER FOR AT LEAST 15
MINUTES. SKIN CONTACT: REMOVE CONTAMINATED CLOTHING AND WASH SKIN
WITH SOAP AND WAT ER. INGESTION: DRINK WATER. AS NECESSARY, CONSULT
A PHYSICIAN FOR ANY OF THOSE CONDITIONS
Fire Fighting
Flash Point Method:SCC
Flash Point:=7.2C, 45.F
Lower Limits:1.1
Extinguishing Media:USE WATER FOG, FOAM, DRY CHEMICAL, OR CARBON
DIOXIDE.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
BREATHING VAPORS, VENTILATE AREA, AND REMOVE WITH INERT ABSORBENT
AND NON-SPARKING TOOLS. DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE
AND FEDERAL REGULATIONS. BEFO RE ATTEMPTING TO CLEAN UP. SEE
SECTION II.
Handling
Handling and Storage Precautions:DO NOT TALKE INTERNALLY. CONTAINERS
SHOULD BE GROUNDED WHEN POURING. AVOID FREE SPILL OF LIQUID IN
EXCESS OF A FEW INCHES. MAKE SURE THE DRUM IS COMPLETELY EMPTY
BEFORE ATTEMPTING TO WELD OR BREEZE. T HE DRUM SHOULD BE
INDUSTRIALLY CLEANED PRIOR TO REUSE.
Exposure Controls
Respiratory Protection:WHERE GENERAL DILUTION OR LOCAL EXHAUST FAILS TO
ADEQUATELY DILUTE THE WA/PEL OF THE MATERIAL, THEN RESPIRATORY
PROTECTION SHOULD USED AS FOLLOWS: IN ACCORD WITH 29CFR 1910.134,
USE NIOSH/MSHA APPROVE D AIR TYPE RESPIRATORS OR HOODS FOR ENCLOSED
AND CONFINED AREAS. AIR PURIFYING RESPIRATORS MAY BE USED FOR OTHER
AREAS.
Ventilation:PROVIDE GENERAL DILUTION OR LOCAL EXHAUST VENTILATION TO
KEEP THE TWA AND LELE BELOW ACCEPTABLE LIMITS AND TO REMOVE
DECOMPOSITION PRODUCTS.
Protective Gloves:CHEMICAL RESISTANT GLOVES ARE REQUIRED OR REPEATED
CONTACT.
Eye Protection:USE SAFETY EYEWEAR DESIGNED TO PROTECT AGAINST SPLASH OF
LIQUIDS.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:>93.3C, 200.F
B.P. Text:200-999F
Vapor Density:>AIR
VOC Grams/Liter:2.6
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:FUMES MAY CONTAIN CARBON MONOXIDE AND
OXIDES OF NITROGEN. MAY PRODUCE HAZARDOUS FUMES WHEN TO
DECOMPOSITION AS IN WELDING.
Toxicology
Toxicological Information:ORAL TOXICITY: SWALLOWING MATERIAL MAY CAUSE
IRRITATION OF GASTROINTESTINAL LINING, NAUSEA, VOMITING, DIARRHEA &
ABDOMINAL PAIN. EYE IRRITATION: NOT EXPECTED TO CAUSE EYE
IRRITATION. SKIN IRITATION: N OT EXPECTED TO BE A PRIMARY SKIN
IRRITANT PROLONGED OR REPEATED CONTACT MAY CAUSE IRRITATION.
Ecology
Ecological:MATERIAL IS EXPECTED TO HAVE ADVERSE EFFECTS ON MARINE &
PLANT LIFE. SPILLS MAY CONTAMINATE DRINKING WATER.
Transport
Transport Information:NOT REGULATED
Regulatory
SARA Title III Information:SARA 313 % BY WT. STONTIUM CHROMATE
7789-06-2: 30.5%, XYLENE 1330-20-7: 3%. METHYL ISOBUTYL KETONE
108-10-1: 9%, AND % CHROMIUM VI IN NON-VOLATILES 7440-47-3: 18.1%
Federal Regulatory Information:CLEAN AIR ACT OF 1990 % BY WT. STRONTIUM
CHROMATE 7789-06-2: 30.5%, XYLENE 1330-20-7: 3%, METHYL ISOBUTYL
KETONE 108-10-1: 9%, AND % CHROMIUM VI IN NON-VOLATILES 7440-47-3:
18.1% TOXIC SUBSTANCE CONT ROL ACT (TSCA) STATUS: THE INGREDIENTS
OF THIS PRODUCT ARE ON THE TSCA INVENTORY.
State Regulatory Information:PROP 65 BY WT (4) FORMALDEHYDE 50-00-00
.0220%, TOLUENE 108-88-3 .01933%, BENZENE 71-43-2 .00029%.AND %
CHROMIUM VI IN NON-VOLATILES 7440-47-3: 18.09715. IN COMPLAINCE
WITH THE NEW JERSEY RIGHT TO K NOW LAW INGREDIENTS: PROPRIETARY
EPOXY RESIN, CYSTALLINE SILICA (QUARTZ) 14808-60-7, STRONTIUM
CHROMATE 7789-06-2, METHYL AMYL KETONE 110-43-0, XYLENE 1330-20-7,
METHYL ISOBUTYL KETONE 108-10-1, % CHR OMIUM VI IN NON-VOLATILES
7440-47-3.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.